Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Richardson, TX

Pool Deck Cleaning for Travertine in Richardson, TX

Low-pressure wash for travertine. Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone. Typical cost $200-$500.

The secret to pool deck cleaning for travertine is using the right method, not the most pressure. In Richardson, TX, we match the cleaner and pressure to the surface so it comes out clean without damage. For travertine, that means low-pressure wash.

The right method for the job

Low-pressure washCleaning method
Usually under 1,500 PSI with a wide tipPressure

Cleaning solution: A pH-neutral stone cleaner.

What to know about cleaning travertine

Travertine is a natural limestone popular around pools. It is porous and soft, so it stains easily and is damaged by acidic cleaners. Gentle cleaning and a breathable sealer keep it looking good.

Avoid: Acidic cleaners (including vinegar) and high pressure, which pit the stone and open its pores.

How often: Clean yearly; reseal every 2-3 years.

Signs you need pool deck cleaning for travertine

  • Slippery spots near the water
  • Black or green growth at the edges and in joints
  • Rust or leaf stains
  • Faded or dirty coating
  • Hard-water and chlorine residue

What causes the dirt and stains

  • Constant splashing and standing water
  • Sunscreen, body oils and pool chemicals
  • Leaves and pool toys left on the deck
  • Hard water drying on the surface

Easy upkeep between cleanings

  • Hose off the deck after heavy pool use
  • Remove leaves and toys before they stain
  • Keep chlorine and acid containers off the deck surface
  • Ask us before using any cleaner on a coated or stone deck

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Peeling or etching a coated 'cool deck' surface with high pressure
  • Chemicals and wash water getting into the pool
  • Pitting travertine with acid cleaners
  • Slips on wet, treated surfaces

Our process for pool deck cleaning for travertine

  1. Check the deck material and coating
  2. Protect the pool and nearby plants
  3. Pre-treat algae and stains with pool-safe methods
  4. Clean with pressure suited to the surface
  5. Rinse thoroughly away from the water

Many pool decks have a textured acrylic or 'cool deck' coating. These need lower pressure than bare concrete, and a deck that is peeling may need recoating rather than more cleaning.

Pool Deck Cleaning for Travertine cost in Richardson, TX

$200-$500Typical range for a typical residential pool deck
1-3 hoursTypical time on site
Once or twice a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for travertine

Local pool deck cleaning for travertine for Richardson, TX

Shaded driveways, walkways and pool decks in Texas grow black mildew and algae quickly and can become slippery. Pre-treating the growth before washing, and post-treating after, keeps them clean longer than pressure alone.

Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

Besides Richardson (ZIP codes 75080, 75081, 75082, 75083 and 75085), we handle pool deck cleaning for travertine in Plano (5.3 mi), Garland (5.8 mi), Addison (5.8 mi) and Sachse (8 mi). Call (555) 010-0000 for a free quote in Richardson.

Pool Deck Cleaning for Travertine: frequently asked questions

How much does pool deck cleaning for travertine cost in Richardson, TX?

Pool Deck Cleaning for Travertine typically costs $200-$500 for a typical residential pool deck, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pool deck cleaning for travertine?

For travertine: usually under 1,500 PSI with a wide tip. What we avoid: acidic cleaners (including vinegar) and high pressure, which pit the stone and open its pores. The cleaning solution does most of the work, followed by a gentle rinse.

Is pool deck cleaning for travertine safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pool deck cleaning for travertine?

Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Richardson, TX

Rust Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$500

Exterior Mold & Mildew Removal

Killing and removing mold, mildew and algae from siding, decks, walkways and fences, with treatment that slows regrowth.

Typical $250-$700

Fleet Washing

On-site washing for company trucks, vans, trailers and equipment, scheduled at your yard.

Typical $150-$800

Brick Cleaning

Brick cleaning for walls, chimneys, steps and patios that removes algae, dirt and efflorescence without eroding mortar.

Typical $250-$700

Dumpster Pad Cleaning

Degreasing and sanitizing dumpster pads and enclosures to cut odors, pests and slip hazards.

Typical $100-$300

House Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$700

Roof Cleaning for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $400-$1,000

Gutter Cleaning

Clearing leaves and debris from gutters and flushing downspouts so water drains away from the house.

Typical $150-$350

Pressure Washing for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$600

Paver Cleaning & Sealing

Paver cleaning, re-sanding with polymeric sand and sealing to lock joints, deter weeds and bring back color.

Typical $600-$1,800

HOA & Apartment Pressure Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $800-$5,000

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Richardson, TX. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote